LPS500A-MM-SC-R3 Black Box LPS500 Transceiver/Media Converter

• Copper port auto negotiates for network speed and features Auto MDI-X for easy cabling.
• LEDs indicate when it is feeding PoE power as well as when power is interrupted.

RoHS compliant. Connect Gigabit-speed fiber optic to a 10-/100-/1000-Mbps copper UTP segment while also powering 802.3af devices at the end of the CAT5 run. This PoE PSE Gigabit Media Converter from Black Box enables you to transparently connect copper cabling to multimode fiber as an economical way to extend Ethernet communications well beyond the 100-meter (327-foot) CATx limit.

Along with matching copper to interference-free fiber at Gigabit speeds, the converter doubles as power sourcing equipment (PSE) for Power over Ethernet (PoE) devices plugged in on the copper side. Using existing UTP cabling for both data communications and 48-VDC power simplifies a network application in terms of provisioning power and maintaining equipment.

It's particularly ideal for locating equipment where electrical access is inconvenient or just too expensive to locate. Install PoE-compatible security cameras and wireless access points in areas without any nearby power outlets while reducing your overall power consumption, too. Plus, the PoE PSE Gigabit Media Converter has extensive power management features, including overcurrent protection, undercurrent detection, minimum load sensing, and PSE MDI power enable/disable.

For reliable data communications, the media converter boasts link fault pass-through (LFP) capabilities, monitoring receive ports on both the fiber and copper sides for loss of signal. If signaling is lost on one media port, it automatically disables the transmit (TX) signal to the other media port.

Additionally, a far-end fault (FEF) function enables the converter to cease sending a link pulse to a link partner if signaling on the fiber receive (RX) port is lost. The link partner will also synchronously stop sending data. This way, you don't lose valuable data transmitted over an invalid link.

• General Information

  ---

  Manufacturer: Black Box Corporation
  Manufacturer Part Number: LPS500AMMSCR3
  Manufacturer Website Address: http://www.blackbox.com
  Brand Name: Black Box
  Product Series: LPS500
  Product Name: LPS500 Transceiver/Media Converter
  Marketing Information:

  • Copper port auto negotiates for network speed and features Auto MDI-X for easy cabling.
  • LEDs indicate when it is feeding PoE power as well as when power is interrupted.

  
  

  RoHS compliant. Connect Gigabit-speed fiber optic to a 10-/100-/1000-Mbps copper UTP segment while also powering 802.3af devices at the end of the CAT5 run. This PoE PSE Gigabit Media Converter from Black Box enables you to transparently connect copper cabling to multimode fiber as an economical way to extend Ethernet communications well beyond the 100-meter (327-foot) CATx limit.

  Along with matching copper to interference-free fiber at Gigabit speeds, the converter doubles as power sourcing equipment (PSE) for Power over Ethernet (PoE) devices plugged in on the copper side. Using existing UTP cabling for both data communications and 48-VDC power simplifies a network application in terms of provisioning power and maintaining equipment.

  It's particularly ideal for locating equipment where electrical access is inconvenient or just too expensive to locate. Install PoE-compatible security cameras and wireless access points in areas without any nearby power outlets while reducing your overall power consumption, too. Plus, the PoE PSE Gigabit Media Converter has extensive power management features, including overcurrent protection, undercurrent detection, minimum load sensing, and PSE MDI power enable/disable.

  For reliable data communications, the media converter boasts link fault pass-through (LFP) capabilities, monitoring receive ports on both the fiber and copper sides for loss of signal. If signaling is lost on one media port, it automatically disables the transmit (TX) signal to the other media port.

  Additionally, a far-end fault (FEF) function enables the converter to cease sending a link pulse to a link partner if signaling on the fiber receive (RX) port is lost. The link partner will also synchronously stop sending data. This way, you don't lose valuable data transmitted over an invalid link.

  
  Product Type: Transceiver/Media Converter
  
  Interfaces/Ports

  ---

  Total Number of Ports: 2
  Network (RJ-45): Yes
  Number of PoE (RJ-45) Ports: 1
  PoE Port Type: PSE
  Number of SC Ports: 1
  SC Port Type: Duplex
  
  Media & Performance

  ---

  Media Type Supported:
• Twisted Pair
• Optical Fiber
Fiber Mode Supported: Multi-mode
Fiber Optic Wavelength: 850 nm
Maximum Distance Supported: 984.25 ft
Fiber Optic Cable Standard:
• 62.5 µm
• 50 µm

Network & Communication

---

Ethernet Technology: Gigabit Ethernet
Network Technology:

1000Base-SX

10/100/1000Base-T

Power Description

---

Power Source: Power Supply
Power Consumption: 65 W

Physical Characteristics

---

Form Factor: Wall Mountable
Height: 1.6"
Width: 6.2"
Depth: 5.2"
Weight (Approximate): 1.30 lb

Miscellaneous

---

Environmentally Friendly: Yes
Environmental Compliance:

Restriction of Hazardous Substances (RoHS)

Waste Electrical and Electronic Equipment Directive (WEEE)

TAA Compliant: Yes

Warranty

---

Limited Warranty: 2 Year
Additional Warranty Information:

Double Diamond Warranty (Standard)

 

Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm.

What Forms Of Payment Do We Take?
We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance.  Purchase orders are accepted and net terms are given based on a credit check.

Why Buy From ITO?
ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry.  Our account managers are here to answer your questions and provide you with solutions very effectively.