 |
 |
 |
|
Features | 1.95kVA/1.95kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments This line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment. The SMART2200RXLTAA is ideal for large and small network devices, high-end workstations, storage and security equipment in labs, server rooms and data centers. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRXLTAA, sold separately). The SMART2200RXLTAA restarts automatically once power is restored, regardless of battery charge level, saving you a costly site visit. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions Built-in AVR corrects abnormal voltage conditions without using the battery. The SMART2200RXLTAA maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure. Pure Sine Wave Output and Unity Power Factor Pure sine wave output power ensures maximum stability while unity power factor ensures the most watts possible at each power rating, providing maximum compatibility with sensitive equipment. Optional LXE Network Management Card Allows Remote Control and Access 24/7 The WEBCARDLXE (sold separately) enables access to advanced features like switchable load banks, automatic email messaging on power events, and full remote control of the UPS. The IP-based Auto Probe feature ensures network uptime by communicating with other network devices and automatically rebooting IT equipment when a loss of connectivity is detected. Note : The SMART2200RXLTAA is not compatible with WEBCARDLX. Managed NEMA Outlets Protect Your Connected Components One L5-20R and six 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RXLTAA maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
-
General Information
Manufacturer: Tripp Lite by Eaton Manufacturer Part Number: SMART2200RXLTAA Manufacturer Website Address: https://tripplite.eaton.com/ Brand Name: Tripp Lite by Eaton Product Line: SmartPro Product Model: SMART2200RXLTAA Product Name: SmartPro SMART2200RXLTAA 1950VA Rack/Tower UPS Marketing Information: Features | 1.95kVA/1.95kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments This line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment. The SMART2200RXLTAA is ideal for large and small network devices, high-end workstations, storage and security equipment in labs, server rooms and data centers. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRXLTAA, sold separately). The SMART2200RXLTAA restarts automatically once power is restored, regardless of battery charge level, saving you a costly site visit. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions Built-in AVR corrects abnormal voltage conditions without using the battery. The SMART2200RXLTAA maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure. Pure Sine Wave Output and Unity Power Factor Pure sine wave output power ensures maximum stability while unity power factor ensures the most watts possible at each power rating, providing maximum compatibility with sensitive equipment. Optional LXE Network Management Card Allows Remote Control and Access 24/7 The WEBCARDLXE (sold separately) enables access to advanced features like switchable load banks, automatic email messaging on power events, and full remote control of the UPS. The IP-based Auto Probe feature ensures network uptime by communicating with other network devices and automatically rebooting IT equipment when a loss of connectivity is detected. Note : The SMART2200RXLTAA is not compatible with WEBCARDLX. Managed NEMA Outlets Protect Your Connected Components One L5-20R and six 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RXLTAA maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Product Type: Line-interactive UPS Technical Information
AVR: Yes
Plug/Connector Type: NEMA 5-20P
Receptacle Type: - NEMA 5-20R
- NEMA L5-20R
Receptacle Detail: - 6 x NEMA 5-20R
- 1 x NEMA L5-20R
Number of Load Management Outlets: 2
Cord Length: 10 ft
Transfer Time: 4 ms
EMI/RFI Noise Filter: Yes
Phase: Single Phase
Efficiency Detail: 96% (AC Mode)
Application/Usage: - Server
- Switch
- IT Equipment
- Telecommunication
- Enterprise
- Workstation
- Storage
- Security
- Lab Equipment
- Server Room
- Data Center
- Network
- Desktop
Surge Suppression: Yes
Features: Cold Start Function
Power Description
Load Capacity (VA): 1950 VA
Load Capacity (Watt): 1950 W
Input Voltage: 120 V AC
Input Voltage Range: 70 V AC - 153 V AC
Input Current: 16 A
Output Voltage: - 120 V AC
- 100 V AC
- 110 V AC
- 125 V AC
Output Frequency: - 50 Hz
- 60 Hz
Waveform Type: Pure Sine Wave
Surge Energy Rating: 380 J
Circuit Breaker: Yes
Output Power Factor: 1
Display & Graphics
Display: LCD
Management
Network Management: - Dry Contact
- DB-9 RS-232
- Contact Closure
- SNMP/Web
Alarm: - Power Failure
- Low Battery
- Overload
- UPS Fault
- Remote Shutdown
Controls/Indicators
Status Indicators: LED Indicators: - Battery Mode
- Battery Low Warning
- Fault/Alarm
Interfaces/Ports
Serial Port: Yes
USB: Yes
EPO Port: Yes
USB (HID Compliant) Port: Yes
Battery Information
DC System Voltage: 72 V DC
Battery Characteristics: Valve-regulated
Battery Chemistry: Lead Acid
Backup/Run Time (Full Load): 4 Minute
Backup/Run Time (Half Load): 12 Minute
Hot Swappable: Yes
Typical Battery Recharge Time: 4.50 Hour
Replaceable Battery: Yes
Environmental Conditions
Maximum Storage Elevation: 32808 ft
Storage Temperature: 5°F (-15°C) - 122°F (50°C)
Minimum Operating Temperature: 32°F (0°C)
Maximum Operating Temperature: 104°F (40°C)
Sound Emission (A-Weighted): 45 dB(A)
Thermal Dissipation: 173.21 W
Physical Characteristics
Height: 3.4"
Width: 17"
Depth: 23"
Rack Height: 2U
Form Factor: Rack/Tower
Weight (Approximate): 65.30 lb
Miscellaneous
Package Contents: - SmartPro SMART2200RXLTAA 1950VA Rack/Tower UPS
- USB Cable
- DB9 Cable
- Rack-mounting Hardware
- Tower Support Stands
- Safety Instructions
- Quick Start Guide
Energy Star: Yes TAA Compliant: Yes Energy Efficiency Certification: ENERGY STAR 2.0 Environmental Compliance: Restriction of Hazardous Substances (RoHS) Warranty
Limited Warranty: 3 Year Additional Warranty Information: 2-year warranty, 3 year with registration.
 Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm. What Forms Of Payment Do We Take?We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance. Purchase orders are accepted and net terms are given based on a credit check. Why Buy From ITO?ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry. Our account managers are here to answer your questions and provide you with solutions very effectively.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Key Features
Product Description
Features | 1.95kVA/1.95kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments This line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment. The SMART2200RXLTAA is ideal for large and small network devices, high-end workstations, storage and security equipment in labs, server rooms and data centers. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRXLTAA, sold separately). The SMART2200RXLTAA restarts automatically once power is restored, regardless of battery charge level, saving you a costly site visit. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions Built-in AVR corrects abnormal voltage conditions without using the battery. The SMART2200RXLTAA maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure. Pure Sine Wave Output and Unity Power Factor Pure sine wave output power ensures maximum stability while unity power factor ensures the most watts possible at each power rating, providing maximum compatibility with sensitive equipment. Optional LXE Network Management Card Allows Remote Control and Access 24/7 The WEBCARDLXE (sold separately) enables access to advanced features like switchable load banks, automatic email messaging on power events, and full remote control of the UPS. The IP-based Auto Probe feature ensures network uptime by communicating with other network devices and automatically rebooting IT equipment when a loss of connectivity is detected. Note : The SMART2200RXLTAA is not compatible with WEBCARDLX. Managed NEMA Outlets Protect Your Connected Components One L5-20R and six 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four 5-20R outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RXLTAA maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.
- AVR: Yes
- Plug/Connector Type: NEMA 5-20P
- Receptacle Type: NEMA 5-20R, NEMA L5-20R
- Receptacle Detail: 6 x NEMA 5-20R, 1 x NEMA L5-20R
- Number of Load Management Outlets: 2
- Cord Length: 10 ft
- Transfer Time: 4 ms
- EMI/RFI Noise Filter: Yes
- Phase: Single Phase
- Efficiency Detail: 96% (AC Mode)
- Application/Usage: Server, Switch, IT Equipment, Telecommunication, Enterprise, Workstation, Storage, Security, Lab Equipment, Server Room, Data Center, Network, Desktop
- Surge Suppression: Yes
- Features: Cold Start Function
- Load Capacity (VA): 1950 VA
- Load Capacity (Watt): 1950 W
- Input Voltage: 120 V AC
- Input Voltage Range: 70 V AC - 153 V AC
- Input Current: 16 A
- Output Voltage: 120 V AC, 100 V AC, 110 V AC, 125 V AC
- Output Frequency: 50 Hz, 60 Hz
- Waveform Type: Pure Sine Wave
- Surge Energy Rating: 380 J
- Circuit Breaker: Yes
- Output Power Factor: 1
- Display: LCD
- Network Management: Dry Contact, DB-9 RS-232, Contact Closure, SNMP/Web
- Alarm: Power Failure, Low Battery, Overload, UPS Fault, Remote Shutdown
- Status Indicators:
LED Indicators: Battery Mode, Battery Low Warning, Fault/Alarm, - Serial Port: Yes
- USB: Yes
- EPO Port: Yes
- USB (HID Compliant) Port: Yes
- DC System Voltage: 72 V DC
- Battery Characteristics: Valve-regulated
- Battery Chemistry: Lead Acid
- Backup/Run Time (Full Load): 4 Minute
- Backup/Run Time (Half Load): 12 Minute
- Hot Swappable: Yes
- Typical Battery Recharge Time: 4.50 Hour
- Replaceable Battery: Yes
- Maximum Storage Elevation: 32808 ft
- Storage Temperature: 5°F (-15°C) - 122°F (50°C)
- Minimum Operating Temperature: 32°F (0°C)
- Maximum Operating Temperature: 104°F (40°C)
- Sound Emission (A-Weighted): 45 dB(A)
- Thermal Dissipation: 173.21 W
- Height: 3.4"
- Width: 17"
- Depth: 23"
- Rack Height: 2U
- Form Factor: Rack/Tower
- Weight (Approximate): 65.30 lb
- Package Contents:
SmartPro SMART2200RXLTAA 1950VA Rack/Tower UPS, USB Cable, DB9 Cable, Rack-mounting Hardware, Tower Support Stands, Safety Instructions, Quick Start Guide, - Energy Star: Yes
- TAA Compliant: Yes
- Energy Efficiency Certification: ENERGY STAR 2.0
- Environmental Compliance: Restriction of Hazardous Substances (RoHS)
- Limited Warranty: 3 Year
- Additional Warranty Information:
2-year warranty, 3 year with registration.
|
|
|
|
|
|
|