|
|
|
|
Double-Conversion UPS Protects Equipment against Damage, Downtime and Data Loss This 200/208/220/230/240V 50/60 Hz UPS system maintains perfect output by converting AC input to DC, then reconverting UPS output to fully regulated sine wave AC with +/-2% voltage regulation in online and battery modes. Featuring a 900W capacity, high 0.9 power factor, 627 joules of surge suppression, true on-line operation with pure sine wave output and zero transfer time to battery mode in on-line double-conversion mode, the SmartOnline® SUINT1000LCD2UN double-conversion UPS provides the highest level of AC power protection and battery backup for critical network closet, computer room and data center equipment. Set Power Strategies to Reflect Your Protection Priorities Pick your power strategy, from precise power for sensitive systems to the highest possible electrical efficiency, while ensuring 100% uptime. Choose from five selectable strategies: Max Efficiency, Max Quality, Frequency Regulation, Frequency Conversion and Auto Adaptive, which automatically offers increased efficiency when power conditions are good and enhanced power quality when power conditions are poor. Individually Controllable Load Banks Let You Access and Control Outlets Remotely Four C13 outlets are split evenly into two switchable load banks, allowing you to reboot select components or shed loads remotely. In addition to those four outlets, this UPS provides two more C13 outlets in their own unswitched bank for powering critical components. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable internal battery (RBC24S) provides 12.3 minutes of support at half load (450W) and 4.7 minutes at full load (900W), keeping protected equipment operational through power failures. For mission-critical applications demanding scalable extended runtime, the UPS supports "smart" external battery packs, such as Tripp Lite's BP24V36-2US (sold separately). Both the internal and external batteries are automatically sensed and configured during replacement to offer accurate runtime-remaining and battery age notifications during outages. The intelligent battery management system with temperature-compensated charging extends battery life. Automatic Bypass Maintains Utility Output During Fault Conditions Auto-bypass mode keeps connected equipment powered and operational, even during UPS fault conditions. ENERGY STAR-Certified Economy Mode Helps You Save Money and Protect the Environment By meeting strict EPA efficiency guidelines, this ENERGY STAR-certified UPS system helps you save money and energy. A power-saving Economy mode setting option offers enhanced efficiency and reduced BTU output when utility power is already high quality. Automatically Turns Back On After Power Is Restored Battery-independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement. Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring The front-panel LCD screen reports UPS operating mode, detailed UPS status and site-power information, as well as a variety of advanced UPS setup and configuration options. LEDs indicate AC input/output, battery and fault status. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and HID-compliant USB ports connect to a computer running Tripp Lite's free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure.
-
General Information Manufacturer: Tripp Lite by Eaton Manufacturer Part Number: SUINT1000LCD2UN Manufacturer Website Address: https://tripplite.eaton.com/ Brand Name: Tripp Lite by Eaton Product Line: SmartOnline Product Model: SUINT1000LCD2UN Product Name: SmartOnline SUINT1000LCD2UN 1000VA Rack-mountable UPS Marketing Information: Double-Conversion UPS Protects Equipment against Damage, Downtime and Data Loss This 200/208/220/230/240V 50/60 Hz UPS system maintains perfect output by converting AC input to DC, then reconverting UPS output to fully regulated sine wave AC with +/-2% voltage regulation in online and battery modes. Featuring a 900W capacity, high 0.9 power factor, 627 joules of surge suppression, true on-line operation with pure sine wave output and zero transfer time to battery mode in on-line double-conversion mode, the SmartOnline® SUINT1000LCD2UN double-conversion UPS provides the highest level of AC power protection and battery backup for critical network closet, computer room and data center equipment. Set Power Strategies to Reflect Your Protection Priorities Pick your power strategy, from precise power for sensitive systems to the highest possible electrical efficiency, while ensuring 100% uptime. Choose from five selectable strategies: Max Efficiency, Max Quality, Frequency Regulation, Frequency Conversion and Auto Adaptive, which automatically offers increased efficiency when power conditions are good and enhanced power quality when power conditions are poor. Individually Controllable Load Banks Let You Access and Control Outlets Remotely Four C13 outlets are split evenly into two switchable load banks, allowing you to reboot select components or shed loads remotely. In addition to those four outlets, this UPS provides two more C13 outlets in their own unswitched bank for powering critical components. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable internal battery (RBC24S) provides 12.3 minutes of support at half load (450W) and 4.7 minutes at full load (900W), keeping protected equipment operational through power failures. For mission-critical applications demanding scalable extended runtime, the UPS supports "smart" external battery packs, such as Tripp Lite's BP24V36-2US (sold separately). Both the internal and external batteries are automatically sensed and configured during replacement to offer accurate runtime-remaining and battery age notifications during outages. The intelligent battery management system with temperature-compensated charging extends battery life. Automatic Bypass Maintains Utility Output During Fault Conditions Auto-bypass mode keeps connected equipment powered and operational, even during UPS fault conditions. ENERGY STAR-Certified Economy Mode Helps You Save Money and Protect the Environment By meeting strict EPA efficiency guidelines, this ENERGY STAR-certified UPS system helps you save money and energy. A power-saving Economy mode setting option offers enhanced efficiency and reduced BTU output when utility power is already high quality. Automatically Turns Back On After Power Is Restored Battery-independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement. Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring The front-panel LCD screen reports UPS operating mode, detailed UPS status and site-power information, as well as a variety of advanced UPS setup and configuration options. LEDs indicate AC input/output, battery and fault status. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and HID-compliant USB ports connect to a computer running Tripp Lite's free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure. Product Type: Double Conversion Online UPS Technical Information Plug/Connector Type: IEC 60320 C14 Receptacle Type: IEC 60320 C13 Receptacle Detail: 6 x IEC 60320 C13 Dataline Protection: - RJ-11
- RJ-45
Overload Protection: Yes Transfer Time: 0 ns EMI/RFI Noise Filter: Yes Phase: Single Phase Energy Saving: Green Energy-Saving Application/Usage: - Mission Critical Equipment
- Data Center
- Computer Room
- Network Closet
- Server
Power Description Load Capacity (VA): 1000 VA Load Capacity (Watt): 900 W Input Voltage: 230 V AC Output Voltage: - 200 V AC
- 208 V AC
- 220 V AC
- 230 V AC
- 240 V AC
Input Frequency: 50 Hz Output Frequency: 60 Hz Waveform Type: Pure Sine Wave Surge Energy Rating: 627 J Management Network Management: SNMP/HTTP Remote Monitoring Alarm: - Power Failure
- Low Battery
- Overload
- Fault
Controls/Indicators Status Indicators: 4 Front Panel LEDs: - AC Input (Green)
- AC Output (Green)
- Battery (Yellow)
- Fault (Red)
Front Panel LCD Display: - Interactive Front-panel LCD Interface Reports UPS Operating Mode
- Fetailed UPS Status And Site-Power Information
- LCD Interface Also Enables A Variety Of Advanced UPS Setup And Configuration Options
Interfaces/Ports Serial Port: Yes EPO Port: Yes USB (HID Compliant) Port: Yes Battery Information DC System Voltage: 24 V DC Backup/Run Time (Full Load): 4.70 Minute Backup/Run Time (Half Load): 12.30 Minute Hot Swappable: Yes Typical Battery Recharge Time: 4.10 Hour Replaceable Battery: Yes Environmental Conditions Storage Temperature: 5°F (-15°C) - 122°F (50°C) Maximum Operating Temperature: 104°F (40°C) Physical Characteristics Height: 3.5" Width: 17.2" Depth: 15.6" Rack Height: 2U Form Factor: Rack-mountable Weight (Approximate): 28 lb Miscellaneous Package Contents: - SmartOnline SUINT1000LCD2UN 1000VA Rack-mountable UPS
- WEBCARDLX Network Interface Card
- USB Cable
- RS-232 Cable
- EPO Cable
- 2 x C13-to-C14 Power Cables
- 4-post Rack-mounting Hardware
- Owner's Manual
Energy Star: Yes Country of Origin: China Environmentally Friendly: Yes Environmental Compliance: Restriction of Hazardous Substances (RoHS) Warranty Limited Warranty: 2 Year
Dedicated account managers are available to assist you with purchasing and presales questions at 877-712-2230 Monday through Friday 8-5pm. What Forms Of Payment Do We Take?We accept all forms of payment including Visa, Mastercard, American Express, Discover, Wire Transfer, and Check in Advance. Purchase orders are accepted and net terms are given based on a credit check. Why Buy From ITO?ITO Solutions, Inc. purpose is to provide you, our client, with best in class technology solutions to help you run your network efficiently by leveraging our integrity, partnerships, and years of experience within the IT industry. Our account managers are here to answer your questions and provide you with solutions very effectively.
|
|
|
|
|
|
|
|
|
|
|
|
|
Key Features
Product Description
Double-Conversion UPS Protects Equipment against Damage, Downtime and Data Loss This 200/208/220/230/240V 50/60 Hz UPS system maintains perfect output by converting AC input to DC, then reconverting UPS output to fully regulated sine wave AC with +/-2% voltage regulation in online and battery modes. Featuring a 900W capacity, high 0.9 power factor, 627 joules of surge suppression, true on-line operation with pure sine wave output and zero transfer time to battery mode in on-line double-conversion mode, the SmartOnline® SUINT1000LCD2UN double-conversion UPS provides the highest level of AC power protection and battery backup for critical network closet, computer room and data center equipment. Set Power Strategies to Reflect Your Protection Priorities Pick your power strategy, from precise power for sensitive systems to the highest possible electrical efficiency, while ensuring 100% uptime. Choose from five selectable strategies: Max Efficiency, Max Quality, Frequency Regulation, Frequency Conversion and Auto Adaptive, which automatically offers increased efficiency when power conditions are good and enhanced power quality when power conditions are poor. Individually Controllable Load Banks Let You Access and Control Outlets Remotely Four C13 outlets are split evenly into two switchable load banks, allowing you to reboot select components or shed loads remotely. In addition to those four outlets, this UPS provides two more C13 outlets in their own unswitched bank for powering critical components. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable internal battery (RBC24S) provides 12.3 minutes of support at half load (450W) and 4.7 minutes at full load (900W), keeping protected equipment operational through power failures. For mission-critical applications demanding scalable extended runtime, the UPS supports "smart" external battery packs, such as Tripp Lite's BP24V36-2US (sold separately). Both the internal and external batteries are automatically sensed and configured during replacement to offer accurate runtime-remaining and battery age notifications during outages. The intelligent battery management system with temperature-compensated charging extends battery life. Automatic Bypass Maintains Utility Output During Fault Conditions Auto-bypass mode keeps connected equipment powered and operational, even during UPS fault conditions. ENERGY STAR-Certified Economy Mode Helps You Save Money and Protect the Environment By meeting strict EPA efficiency guidelines, this ENERGY STAR-certified UPS system helps you save money and energy. A power-saving Economy mode setting option offers enhanced efficiency and reduced BTU output when utility power is already high quality. Automatically Turns Back On After Power Is Restored Battery-independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement. Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring The front-panel LCD screen reports UPS operating mode, detailed UPS status and site-power information, as well as a variety of advanced UPS setup and configuration options. LEDs indicate AC input/output, battery and fault status. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and HID-compliant USB ports connect to a computer running Tripp Lite's free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure.
- Plug/Connector Type: IEC 60320 C14
- Receptacle Type: IEC 60320 C13
- Receptacle Detail: 6 x IEC 60320 C13
- Dataline Protection: RJ-11, RJ-45
- Overload Protection: Yes
- Transfer Time: 0 ns
- EMI/RFI Noise Filter: Yes
- Phase: Single Phase
- Energy Saving: Green Energy-Saving
- Application/Usage: Mission Critical Equipment, Data Center, Computer Room, Network Closet, Server
- Load Capacity (VA): 1000 VA
- Load Capacity (Watt): 900 W
- Input Voltage: 230 V AC
- Output Voltage: 200 V AC, 208 V AC, 220 V AC, 230 V AC, 240 V AC
- Input Frequency: 50 Hz
- Output Frequency: 60 Hz
- Waveform Type: Pure Sine Wave
- Surge Energy Rating: 627 J
- Network Management: SNMP/HTTP Remote Monitoring
- Alarm: Power Failure, Low Battery, Overload, Fault
- Status Indicators:
4 Front Panel LEDs: AC Input (Green), AC Output (Green), Battery (Yellow), Fault (Red), Front Panel LCD Display: Interactive Front-panel LCD Interface Reports UPS Operating Mode, Fetailed UPS Status And Site-Power Information, LCD Interface Also Enables A Variety Of Advanced UPS Setup And Configuration Options, - Serial Port: Yes
- EPO Port: Yes
- USB (HID Compliant) Port: Yes
- DC System Voltage: 24 V DC
- Backup/Run Time (Full Load): 4.70 Minute
- Backup/Run Time (Half Load): 12.30 Minute
- Hot Swappable: Yes
- Typical Battery Recharge Time: 4.10 Hour
- Replaceable Battery: Yes
- Storage Temperature: 5°F (-15°C) - 122°F (50°C)
- Maximum Operating Temperature: 104°F (40°C)
- Height: 3.5"
- Width: 17.2"
- Depth: 15.6"
- Rack Height: 2U
- Form Factor: Rack-mountable
- Weight (Approximate): 28 lb
- Package Contents:
SmartOnline SUINT1000LCD2UN 1000VA Rack-mountable UPS, WEBCARDLX Network Interface Card, USB Cable, RS-232 Cable, EPO Cable, 2 x C13-to-C14 Power Cables, 4-post Rack-mounting Hardware, Owner's Manual, - Energy Star: Yes
- Country of Origin: China
- Environmentally Friendly: Yes
- Environmental Compliance: Restriction of Hazardous Substances (RoHS)
- Limited Warranty: 2 Year
|
|
|
|
|
|
|